background image

ENGLISH

2

   

English

IMPORTANT SAFETY INSTRUCTIONS

 Caution:  Read this page carefully to ensure safe operation.

 WARNING

•  Before mounting or wiring etc., be sure to remove the 

wire from the battery minus terminal.

  (Not doing so can cause shorts or fires.)
•   When extending the ignition, battery, or ground wires, 

make sure to use automotive-grade wires or other wires 
with a 0.75mm

2

 (AWG18) or more to prevent wire deterio-

ration and damage to the wore coating.

•   To prevent a short circuit, never put or leave any metallic 

objects (such as coins or metal tools) inside the speaker.

•   In the event the unit generates smoke or abnormal smell, 

immediately switch the power OFF. After this, please 
contact your dealer or nearest service station as soon as 
possible.

 

POWER OFF!

•  Connect the illumination lamp-equipped speakers to DC 

12V, negative ground.

•   Do not attempt to open or modify the unit, for this could 

cause fire hazard or malfunction.

•   After taking the unit out of the polyethylene bag, be sure 

to dispose of the polyethylene bag out of the reach of 
children. Otherwise, they may play with the bag, which 
could cause hazard of suffocation.

 CAUTION

•  Installation and wiring of the product requires expert skill 

and experience. To ensure safety, be sure to have your 
dealer or specialist perform the installation and wiring.

•   Do not install the speaker in a spot exposed to direct sun-

light or excessive heat or humidity.

•   Do not install the speakers in locations which may be 

subject to water or moisture.

•   Do not install the speakers in unstable locations or loca-

tions subject to dust.

•   If the fuse blows, after checking to see if the wiring cord 

has shorted, be sure to replace with the stipulated size 
(amperage) fuse as displayed on the fuse box.

   (Using fuses other than the stipulated size can cause 

fires.)

 

Check the display!

   To replace the fuse, refer to the vehicle instruction manu-

al.

•   To prevent a short circuit when replacing a fuse, discon-

nect the wiring harness at first.

•   Do not use gasoline, naphtha, or any type of solvent to 

clean the speaker. Clean by wiping with a soft, dry cloth.

•   Connect the speaker wires to appropriate speaker con-

nectors separately. Sharing the negative wire of the 
speaker or grounding speaker wires to the metal body of 
the car can cause this unit to fail.

•   Do not connect cables and leads to both RCA cord input 

jacks and the speaker input terminals simultaneously, for 
this may cause malfunction or damage.

•   When making a hole under a seat, inside the trunk, or 

somewhere else in the vehicle, check that there is noth-
ing hazardous on the opposite side such as a gasoline 
tank, brake pipe; or wiring harness, and be careful not to 
cause scratches or other damage.

•   For ground wire mounting, do not fasten the wire to 

an airbag, steering or brake line system or other critical 
safety unit bolts or nut.

  (Can cause accidents.) 

Information on Disposal of Old Electrical 
and Electronic Equipment (applicable for 
EU countries that have adopted separate 
waste collection systems)

Products with the symbol (crossed- out 
wheeled bin) cannot be disposed as house-
hold waste.

Old electrical and electronic equipment should be 
recycled at a facility capable of handling these items 
and their waste by products.
Contact your local authority for details in locating a 
recycle facility nearest to you.
Proper recycling and waste disposal will help con-
serve resources whilst preventing detrimental effects 
on our health and the environment.

Declaration of Conformity with 
regard to the EMC Directive 
2004/108/EC

Manufacturer:

Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,

192-8525 Japan

EU Representative’s:

Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN,
The Netherlands

•   When mounting, be sure to mount in a place that will not 

interfere with driving or be dangerous to passengers dur-
ing sudden braking etc.

  (Cause of injury or accidents.)
•   After installing the unit, check to make sure that electrical 

equipment  such  as  the  brake  lamps,  turn  signal  lamps 
and windshield wipers operate normally.

•  The driver should always stop the vehicle in a safe place 

before performing the following action.

  – Remote control operation
•  Do not use the product for purposes other than on-board 

mounting.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve 
Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun 
olarak üretilmiştir.

This product complies with Directive, Number 26891 re-
garding "REGULATION ON THE RESTRICTION OF THE USE
OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND 
ELECTRONIC EQUIPMENT".

B61-1344̲EN.indd   2

B61-1344̲EN.indd   2

09.5.28   11:53:14 AM

09.5.28   11:53:14 AM

Summary of Contents for KSC-SW01








Reviews: