■
Connect the KRK-10 main panel to the rear panel
with the cable
8. Insert one 14-pin connector of the cable (E30-7514-05)
into the connector (CN3) of the interface unit (A/2) of the
main panel. (
!1
)
9. Secure the cable bush on the main panel and fit the water-
proof packing (orange) (
!2
) securely over top.
CN4
CN3
!8
!8
!7
!6
!5
!2
!2
!3
!4
!4
!1
(Right side)
10. Install the molded cover (
!3
) over the connector on the
main panel and secure it with two screws (
!4
).
11. Insert the other 14-pin connector of the cable into the
connector (CN4) of the interface unit (B/2) of the rear
panel. (
!5
)
12. Secure the cable bush on the rear panel and fit the water-
proof packing (orange) (
!6
) securely over top.
13. Install the molded cover (
!7
) over the connector on the
rear panel and secure it with two screws (
!8
).
Note :
A cable can be connected from the left side as shown
in the Figure 4-5 or from right side.
However, the 14-pin connector must be connected to correct
direction.
Fig. 4-5
