Kenwood KRF-X9995D, Service Manual

Page: 3 / 71

KRF-X9995D/X9995D-S/VR-5700/5900
3
DISASSEMBLY FOR REPAIR
2
x8
3
4
5
6
1
x61
CN10
X07
C/5
X25
C/11
X25
B/11
CN102
CN16
CN103
X13
A/6
CN101
10
x2
10
11
10
x2
10
x2
7
8
9
X25
B/11
X11
A/2
X05
CN1
FRAME(A)
FRAME(C)
FRAME(B)
10
x2
12 x2
12
How to Remove the Front Panel and
the Motor Assy
1. How to Remove the Front Panel
1. Remove the screws (
1
X3) on top of the panel.
2. Remove the screws (
2
X9) located at the the bot-
tom of the panel.
3. Disconnect the cable (
3
) and connectors (
4
,
5
)
on the X13 A/6.
4. Disconnect the connector (
6
) on the X07 A/5.
5. Cut the tie band (
7
X7) as shown in the figure.
6. Remove the screw (
8
X1) on the X25 F/11.
7. Disconnect the connector (
9
) on the X25
G/11.(Except K/P type)
8. Remove the hooks (
0
X2) on the sub panel.
9. Remove the front panel in the direction of arrow.
2. How to Remove the Motor Assy
1. The motor assy can be separated by removing
screws (
-
X4).
Disassembling the Rear Panel and
How to Replace the Power Transistor
1. Disconnect the CN10 on the X07 C/5.
2. Remove all of screws (
1
X61) and digital caps
(
2
X8) on the rear panel.
(The number of screws and caps are vary accord-
ing to the models).
3. Disconnect the cable CN16 (
3
) on the X13 A/6.
4. Disconnect the flexible cables CN101(
4
) on the
X25 C/11, CN102 (
5
) and * CN103 (
6
)on the X25
B/11.
* (K/P type only).
5. Remove the rear panel in the direction of arrow.
6. Remove the screw (
7
), then remove the X25 B/11.
7. To remove the tuner unit, disconnect the CN1 (
8
)
and remove a screw (
9
).
8. Remove the screws (
0
X9) on the frames (A/B/C),
push rivet (
-
) and PC support (
=
x2)on the X11
A/2.
HOOK
X13
(A/6)
CN3
CN2
CN1
MOTOR
AC CONNECTOR
(EXCEPT K/P)
X25
(F/11)
X25
(G/11)
X07
(A/5)
CN8
KRF-X9995D/VR-5900
4
5
3
x3
1
x5
2
x7
7
x4
2
8
6
9
10
x2
11
x4
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299