Resetting the Microcomputer
If the microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the micro-
computer and return the unit to its normal operating condition.
Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left the
factory.
With the power cord plugged in, turn the POWER key
OFF. Then, while holding down the ON/STANDBY key,
press POWER.
•
FM
(T90-0836-05)
(A70-1252-05)
Battery cover (A09-0366-08)
indoor antenna (1)
Loop antenna stand (1)
Remote control unit (1)
Batteries (R03/AAA) (4)
AM loop antenna (1) (T90-0833-05)
KRF-V8010D/V8010DW
2
CONTENTS / ACCESSORIES / CAUTIONS
CONTENTS / ACCESSORIES / CAUTIONS.............2
CONTROLS ...............................................................3
DISASSEMBLY FOR REPAIR...................................5
BLOCK DIAGRAM .....................................................6
CIRCUIT DESCRIPTION ...........................................7
ADJUSTMENT ........................................................ 10
PARTS DESCRIPTIONS .........................................11
PC BOARD ..............................................................12
SCHEMATIC DIAGRAM ..........................................17
EXPLODED VIEW ...................................................30
PARTS LIST.............................................................31
SPECIFICATIONS ...................................................40
Contents
Accessories
Cautions
Please refer to KRF-V5010 (B51-5425-00) and KRF-V7510D (B51-5419-00) service manuals if
need the information on circuit description.
KRF-V8010D(K)
COVER1,1(
98.12.10
17:50
y [ W 3
www.freeservicemanuals.info
12/21/15
Published in Heiloo, Holland.
