background image

English   

27

Ambience effects

Surround modes

This unit is equipped with listen modes that allow you to enjoy an 
enhanced sonic ambience with a variety of video sources.
In order to obtain the optimum effect from the surround modes, 
make sure to input the proper speaker settings beforehand.
See <Speaker settings> 

*

.

The below speaker placements are for 5.1 channel 
surround sound system which are;

• Dolby 

Digital

•  Dolby Pro Logic II
• DTS
• DSP 

mode

• DVD 

6-channel

 

The below speaker placements are for 6.1 channel 
surround sound system which are;

•  Dolby Digital EX
• DTS-ES
• Neo:6

 

Manufactured under license from Dolby Laboratories. 
"Dolby", "Pro Logic" and the double-D symbol are 
trademarks of Dolby Laboratories.

"DTS", "DTS-ES" and "Neo:6" are 
registered trademarks of DTS, Inc.

The below speaker placements are for 7.1 channel 
surround sound system which are;

•  Dolby Pro Logic IIx
• Neo:6

 

L :  

Front Left speaker 

SW :  Subwoofer
C : 

Center speaker

R :  

Front Right speaker

LS : 

Surround Left speaker

RS : 

Surround Right speaker

BS : 

Surround Back speaker

LB : 

Surround Back Left speaker

RB : 

Surround Back Right speaker

B60-5678-00̲00.indd   27

B60-5678-00̲00.indd   27

07.6.22   0:52:14 PM

07.6.22   0:52:14 PM

Summary of Contents for KRF-V6200D













































Reviews: