KRF-V5050D/V5550D/V6050D/V7050D/X9050D
49
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 130 W + 130 W
CENTER (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
............................................................................................. 130 W
SURROUND (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 130 W + 130 W
SUBWOOFER (80Hz, 10% T.H.D. at 8
Ω
one channel driven) ....
............................................................................................. 130 W
Total harmonic distortion ............................. 0.050% (1 kHz, 40W, 8
Ω
)
Frequency response
CD .............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
CD, TUNER, AUX, TAPE ..................................................... 90 dB
Input sensitivity / impedance
CD ......................................................................... 200 mV / 47 k
Ω
MONITOR IN (VIDEO2/MONITOR) ..................... 200 mV / 47 k
Ω
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 k
Ω
MONITOR OUT (VIDEO2/MONITOR) ................... 200 mV / 1 k
Ω
Tone control
BASS ..................................................................
±
10 dB (at 70 Hz)
TREBLE ...........................................................
±
10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency .......................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical .............................. (–15 dBm ~ –21 dBm), 660 nm
±
30nm
Coaxial ................................................................... 0.5 Vp-p / 75
Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) .................................................. 1 Vp-p / 75
Ω
S VIDEO inputs / outputs (KRF-V6050D)
S VIDEO (luminance signal) .................................... 1 Vp-p / 75
Ω
S VIDEO (chrominance signal) ........................ 0.286 Vp-p / 75
Ω
FM tuner section
Tuning frequency range ...................................... 87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................. 1.6
µ
V (75
Ω
)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO ................................................... 28
µ
V (75 W)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO .......................................................... 0.5% (71.2 dBf input)
STEREO ...................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO ......................................................... 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Stereo separation (1 kHz) ............................................................ 40 dB
Selectivity (
±
400 kHz) ................................................................... 50 dB
Frequency response ..................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
9 kHz step .................................................... 531 kHz ~ 1,602 kHz
10 kHz step .................................................. 530 kHz ~ 1,610 kHz
Usable sensitivity ..................................................... 16
µ
V / (600
µ
V/m)
Signal to noise ratio (30% mod. 1 mV input) ............................... 50 dB
GENERAL
Power consumption
KRF-V6050D/V5050D ......................................................... 270 W
KRF-V5550D ........................................................................ 200 W
AC outlet
SWITCHED ........................................................ (total 90 W max.)
Dimensions ......................................................................... W : 440 mm
H : 143 mm
D : 400 mm
Weight (Net)
(KRF-V6050D/V5050D) ........................................................ 9.3 kg
(KRF-V5550D) ...................................................................... 8.4 kg
For other countries
AUDIO section (KRF-V6050D)
Effective power output during STEREO operation
1kHz,10% T.H.D.,at 8
Ω
....................................... 140 W + 140 W
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at 8
Ω
from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion.(FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
............................................................................................. 140 W
SURROUND (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 140 W + 140 W
Total harmonic distortion ............................. 0.050% (1 kHz, 50W, 8
Ω
)
Frequency response
CD .............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM) ....................................................................... 74 dB
CD ......................................................................................... 90 dB
Input sensitivity / impedance
PHONO (MM) ........................................................ 2.5 mV / 27 k
Ω
CD ......................................................................... 200 mV / 47 k
Ω
VIDEO2/MONITOR ............................................... 200 mV / 47 k
Ω
DVD/6ch INPUT .................................................... 200 mV / 47 k
Ω
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 k
Ω
VIDEO2/MONITOR ................................................. 200 mV / 1 k
Ω
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 k
Ω
Tone control
BASS ..................................................................
±
10 dB (at 70 Hz)
TREBLE ...........................................................
±
10 dB (at 10 kHz)
AUDIO section (KRF-V5050D)
Effective power output during STEREO operation
(1 kHz, 10%, 8
Ω
) .......................................................... 140 W + 140 W
Rated power output during STEREO operation
100 watts channel minimum RMS, both channels driven, at 8
Ω
from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
............................................................................................. 140 W
SURROUND (1kHz, 10% T.H.D. at 8
Ω
one channel driven)
.............................................................................. 140 W + 140 W
Total harmonic distortion ............................. 0.050% (1 kHz, 50W, 8
Ω
)
Frequency response
CD .............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM) ....................................................................... 74 dB
CD, TUNER, AUX, TAPE ..................................................... 90 dB
Input sensitivity / impedance
PHONO (MM) ........................................................ 2.5 mV / 27 k
Ω
CD ......................................................................... 200 mV / 47 k
Ω
MONITOR IN (VIDEO2/MONITOR) ..................... 200 mV / 47 k
Ω
DVD/6ch INPUT .................................................... 200 mV / 10 k
Ω
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 k
Ω
MONITOR OUT (VIDEO2/MONITOR) ................... 200 mV / 1 k
Ω
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 k
Ω
Tone control
BASS ..................................................................
±
10 dB (at 70 Hz)
TREBLE ...........................................................
±
10 dB (at 10 kHz)
AUDIO section (KRF-V5550D)
Effective power output during SURROUND operation
(1kHz, 10%, 8
Ω
) ........................................................... 110 W + 110 W
Rated power output during STEREO operation
80 watts per channel minimum RMS, both channels driven, at 8
Ω
from 40 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
SPECIFICATIONS
