manualshive.com logo in svg

Kenwood KRC-PS979R, Instruction Manual

Share
Download
Kenwood KRC-PS979R Instruction Manual Download Page 17

Adjust the frequency of the High-pass filter for rear output.

Display and setting:

"HPF Rear" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.

NOTE

High-pass Filter Frequency for Rear Output

Adjust the frequency of the High-pass filter for front output.

Display and setting:

"HPF Front" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.

NOTE

High-pass Filter Frequency for Front Output

Adjust the Non-fading output level.

Display and setting:

"NF Level" : - 15  –  + 15

• This mode is available only when the non-fading output function

is set to on.

• Not available during the Dual zone system is on.

NOTE

Non-Fading Level

Adjust the fader level.

Display and setting:

"Fader" : Rear 15  –  Front 15

Fader Level

Adjust the balance level.

Display and setting:

"Balance" : Left 15  –  Right 15

Balance Level

Adjust the treble level.

Display and setting:

"TRE" : - 8  –  + 8

Treble Level

— 17 —

Summary of Contents for KRC-PS979R

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands