Kenwood KRC-781R Page 37 Instruction Manual Download

Page: 37 / 44

— 37 —

Make sure that the unit is installed securely in place. If the unit
is unstable, it may malfunction (for example, the sound may
skip).

NOTE

Accessory

Metal mounting
strap

Self-tapping
screw
(commercially
available)

Firewall or metal support

Accessory

Installation

■

Installation

6 mm
MAX.

M5mm

6 mm
MAX.

Installing in Japanese-Made Cars

■

T: Toyota cars
N: Nissan cars

T/N

Accessory

...for Nissan car

Accessory

...for Toyota car

• During installation, do not use any screws except for those

provided. The use of different screws might result in damage
to the main unit.

• Damage may occur if a screwdriver or similar tool is used with

excessive force during the installations.

CAUTION

Refer to the section “Removing the hard rubber frame (P. 38)”
and then remove the hard rubber frame.

Mount the J-Car trim plate with the thick part at the
bottom.

Align the holes in the unit (two locations on each side) with
the vehicle mounting bracket and secure the unit with the
accessory screws.

Bend the tabs of the
mounting sleeve with
a screwdriver or
similar utensil and
attach it in place.

Accessory

J-Car Trim Plate
(place thick part on
bottom)

Summary of Contents for KRC-781R













































Search results

Summary of Contents for KRC-781R

Reviews:

Related manuals for KRC-781R

Brands by name

Popular brands

Kenwood KRC-781R, Instruction Manual

Search results

Summary of Contents for KRC-781R

Reviews:

Related manuals for KRC-781R

Brands by name

Popular brands