You can adjust the faceplate angle for easy viewing.
Sliding the faceplate:
Press the ANG button for at least one second.
Faceplate Angle Adjustment
Press the AUD button to end the control mode.
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
NOTE
4
Adjustment
mode
(Display)
Bass ("Bass")
Treble("Treble")
Balance("Balance")
Fader("Fader")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
Middle("Middle")
Middle decreased.
Middle increased.
4
button
¢
button
Operation of Audio control button
Front channel increased.
Rear channel increased.
Volume Offset
("V Offset")
The sound level of
each source increased.
The sound level of
each source decreased.
Right channel emphasized.
Left channel emphasized.
Adjust various parameters of sound quality.
Press the AUD button for at least one second to enter the
control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Source tone memory
Each source (tape, CD, FM, AM and disc changer) has its own
memory in which to store the bass, middle, and treble tone
settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the
4
/
¢
button.
Look at the table to adjust the mode being displayed.
3
NOTE
Bass
Treble
Middle
Balance
Fader
Volume Offset
2
1
Audio Control Setting
General features
— 8 —
English
KRC-709_U.S_m2 00.12.26 3:30 PM Page 8
