manualshive.com logo in svg

Kenwood KRC-308S, Instruction Manual

Share
Download
Kenwood KRC-308S Instruction Manual Download Page 25

— 25 —

FM tuner section

Frequency Range (200 kHz Space) .............87.9 MHz -107.9 MHz
Usable Sensitivity (S/N: 30dB)......................9.3 dBf (0.8 µV/75 

Ω

)

Quieting Sensitivity (S/N: 50dB) .................15.2 dBf (1.6 µV/75 

Ω

)

Frequency Response (±3.0dB) .................................30 Hz-15 kHz
Signal to Noise ratio  .............................................70 dB (MONO)
Selectivity .......................................................

≥

80 dB (±400 kHz)

Stereo Separation ....................................................40 dB (1 kHz)

AM tuner section

Frequency Range (10 kHz space).....................530 kHz -1700 kHz
Usable Sensitivity (S/N: 20 dB) ..............................28 dBµ (25 µV)

Cassette player section

Tape Speed ..............................................................4.76 cm/sec.
Wow & Flutter.....................................................0.08 % (WRMS)
Frequency response (±3 dB)

(KRC-408/308S: 70µV) ...................................30 Hz -18 kHz
(KRC-38R: 120µV) ..........................................30 Hz -14 kHz

Separation ...............................................................43 dB (1 kHz)
Signal to Noise ratio (KRC-408/308S)

(Dolby NR OFF) ..........................................................57 dB
(Dolby B NR ON) ........................................................65 dB

Signal to Noise ratio (KRC-38R) ...........................................54 dB

Audio section

Preout Level(mV)/Load .........................................1800 mV/10 k

Ω

Preout Impedance ............................................................

≤

600 

Ω

Maximum output power .................................................40 W x 4
Full Bandwidth Power (at less than 1% THD) .................20 W x 4
Tone action

Bass ............................................................100 Hz ±10 dB
Treble ..........................................................10 kHz ±10 dB

General

Operating voltage (11 - 16V allowable) ................................14.4 V
Current Consumption ............................................................10 A 
Installation Size  (W x H x D) ..........................182 x 53 x 155 mm 

....................................................7-3/16 x 2-1/16 x 6-1/8 in.

Weight...................................................................3.1 lbs (1.4 kg)

Specifications subject to change without notice.

Specifications

KRC-408_U.S_K_ms r3  00.12.27 0:09 PM  Page 25

Summary of Contents for KRC-308S



























Reviews:

No comments

Brands by name

Popular brands

Load more brands