E
nglis
h
— 24 —
— 24 —
■
Removing the hard rubber frame
2
When the low er level is removed, remove the upper tw o
locations.
The frame can be removed from the top side in the same manner.
Catch
Lock
1
Engage the catch pins on the removal tool and remove the tw o
locks on the low er level.
Low er the frame and pull it forw ard as show n in the figure.
■
Removing the Unit
4
Low er the removal tool
tow ard the bottom, and pull
out the unit halfw ay w hile
pressing tow ards the inside.
5
Pull the unit all the w ay out
w ith your hands, being
careful not to drop it.
Be careful to avoid injury from the catch pins on the removal tool.
1
Refer to the section “ Removing the hard rubber frame” and then
remove the hard rubber frame.
2
Remove the screw (M 4
×
8) on the back panel.
3
Insert the tw o removal tools deeply into the slots on each side,
as show n.
Accessory
2
Removal tool
Accessory
2
Removal tool
Screw (M 4X8)
(commercially
available)
Installation
