manualshive.com logo in svg

Kenwood KRC-165, Instruction Manual

Share
Download
Kenwood KRC-165 Instruction Manual Download Page 13

— 13 —

Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).

NOTE

8 mm
 MAX.

ø5mm

ø5mm

8mm
 MAX.

Installing in Japanese-Made Cars

■

T: Toyota cars
N: Nissan cars

T

N

N

T

T/N

Accessory

3

...for Nissan car

Accessory

4

...for Toyota car

• During installation, do not use any screws except for those

provided. The use of different screws might result in damage to
the main unit.

• Damage may occur if a screwdriver or similar tool is used with

excessive force during the installations.

2

CAUTION

Refer to the section “Removing the hard rubber frame (P. 14)”
and then remove the hard rubber frame.

Align the holes in the unit (two locations on each side) with the
vehicle mounting bracket and secure the unit with the
accessory screws.

2

1

3

4

Installation

Bend the tabs of the
mounting sleeve with
a screwdriver or
similar utensil and
attach it in place.

Metal mounting
strap 
(commercially
available)

Self-tapping
screw 
(commercially
available)

Firewall or metal support

■

Installation

Screw (M4X8)
(commercially
available)

Summary of Contents for KRC-165

















Reviews:

No comments

Brands by name

Popular brands

Load more brands