15
ENGLISH |
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[AUDIO CONTROL]
, then press the knob.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat
step
3
until the desired item is selected or activated.
4
Press and hold
to exit.
(or
using
RC-406)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to make a selection, then press
ENT
IW
.
To return to the previous setting item or hierarchy, press
.
Default:
XX
SUB-W LEVEL
–15
to
+15 (0)
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8 (+6)
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)
MID LEVEL
–8
to
+8 (+5)
TRE LEVEL
–8
to
+8 (0)
EQ PRO
BASS ADJUST BASS CTR FRQ
60/ 80/ 100/ 200
:
Selects the center frequency.
BASS LEVEL
–8
to
+8 (+6)
:
Adjusts the level.
BASS Q FACTOR
1.00/ 1.25/ 1.50/ 2.00
: Adjusts the quality factor.
BASS EXTEND
ON
:
Turns on the extended bass.
;
OFF
:
Cancels.
MID ADJUST
MID CTR FRQ
0.5/ 1.0/ 1.5/ 2.5K
:
Selects the center frequency.
MID LEVEL
–8
to
+8 (+5)
:
Adjusts the level.
MID Q FACTOR
0.75/ 1.00/ 1.25
:
Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0/ 12.5/ 15.0/ 17.5K
:
Selects the center frequency.
TRE LEVEL
–8
to
+8 (0)
:
Adjusts the level.
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music
genre. (Select
[USER]
to use the customized bass, middle, and treble
settings.)
[DRIVE EQ]
is a preset equalizer that reduces noise from the road.
BASS BOOST
LV1
/
LV2
/
LV3
:
Selects your preferred bass boost level.
;
OFF
:
Cancels.
LOUDNESS
LV1
/
LV2
: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER
SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF
SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W
PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
HPF
THROUGH
: All signals are sent to the speakers. ;
100HZ
/
120HZ
/
150HZ
: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME
OFFSET
(Default:
0
)
–8
to
+8
(for AUX) ;
–8
to
0
(for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND
RECNSTR
(Sound
reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
•
[SUB-W LEVEL]
/
[SUBWOOFER SET]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is
selectable only if
[SWITCH PREOUT]
is set to
[SUB-W]
.
( 4)
• [SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
JS_KWD_KMM_X50BT_MN_03_EN.indd 15
JS_KWD_KMM_X50BT_MN_03_EN.indd 15
5/12/2013 10:14:31 AM
5/12/2013 10:14:31 AM
