28
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated
properly. Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
•
Sound cannot be heard.
•
The unit does not turn on.
•
Information shown on the
display is incorrect.
Clean the connectors.
( 26)
The unit does not work at all.
Reset the unit.
( 3)
Digital Radio
DAB reception is poor.
Make sure
[ON]
is selected for
[DAB ANT POWER]
.
( 4)
“DAB ANT ERR”
Check the DAB antenna. If a passive antenna
(without a booster) is used, set
[DAB ANT POWER]
to
[OFF]
.
( 4)
“RELATED SERV FOUND”
•
Press the volume knob to activate Soft-Link.
( 7)
•
Press
to cancel.
Analog
Radio
•
Radio reception is poor.
•
Static noise while listening
to the radio.
Connect the antenna firmly.
USB/iPod
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the files are recorded.
“LOADING” appears when you
enter search mode by pressing
.
This unit is still preparing the iPod/iPhone music list.
It may take some time to load, try again later.
Symptom
Remedy
USB/iPod
Correct characters are not
displayed (e.g. album
name).
•
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
•
Depending on the display language you have selected
( 5)
, some characters may not be displayed
correctly.
“NA FILE”
Make sure the media contains supported audio files.
( 26)
“NO DEVICE”
Connect a USB device, and change the source to USB again.
“COPY PRO”
A copy-protected file is played.
“UNSUPPORTED DEVICE”
appears.
•
Check whether the connected device is compatible with
this unit and ensure the file systems are in supported
formats.
( 26)
•
Reattach the device.
“UNRESPONSIVE DEVICE”
appears
Make sure the device is not malfunction and reattach the
device.
“USB HUB IS NOT
SUPPORTED” appears.
This unit cannot support a USB device connected via a
USB hub.
•
The source does not
change to “USB” when
you connect a USB
device while listening
to another source.
•
“USB ERROR” appears
The USB port is drawing more power than the design limit.
Turn the power off and unplug the USB device. Then, turn
on the power and reattach the USB device. If this does not
solve the problem, turn the power off and on (or reset the
unit) before replacing with another USB device.
“NO MUSIC”
Connect a USB device that contains playable audio files.
“iPod ERROR”
•
Reconnect the iPod.
•
Reset the iPod.
JS_KWD_KMM_BT504DAB_EN_EN_3.indd 28
JS_KWD_KMM_BT504DAB_EN_EN_3.indd 28
11/23/2017 10:29:32 AM
11/23/2017 10:29:32 AM
