ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1
Press
B
SRC to turn on the unit.
2
Search and select the name of your receiver (“KMM-BT332”/
“KMM-BT270U”/“KMM-BT232U”/“KMR-M332BT”) on the Bluetooth
device.
“PAIRING”
“PASS XXXXXX”
“Device name”
“PRESS” “VOLUME
KNOB” appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
•
/
: “BT1 CONNECTED” and/or “BT2 CONNECTED”
appears on the display window for 2 seconds.
“
” indicator lights up to show the strength of the battery and signal of
the connected device.
•
/
: “BT1” and/or “BT2” indicator on the display
window lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE]
on page 20.
• A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see
[PHONE SELECT]
or
[AUDIO SELECT]
in
[BT MODE]
. (Page 20)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page 21, 22)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more
information.
Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if
[AUTO PAIRING]
is set to
[ON]
. (Page 20)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
•
/
:
[ZONE 2]
illuminates in green color and flashes.
• The unit answers the call automatically if
[AUTO ANSWER]
is set to a selected
time. (Page 18)
During a call:
•
/
:
[ZONE 1]
illuminates according to the settings
made for
[DISPLAY]
(page 26) and
[ZONE 2]
illuminates in green color.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
KMM-BT332_K_B5A-3848-00_EN_1st Draft.indd 17
KMM-BT332_K_B5A-3848-00_EN_1st Draft.indd 17
9/1/2021 9:13:56 AM
9/1/2021 9:13:56 AM
