15
ENGLISH |
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
·
terminal of the car battery.
2
Connect the wires properly.
(See Wiring connection.
(
➜
16)
)
3
Install the unit to your car.
(See Installing the unit (in-dash mounting).)
4
Connect the
·
terminal of the car battery.
5
Reset the unit.
(
➜
3)
INSTALLATION / CONNECTION
Do the required
wiring.
(
➜
16)
Dashboard of
your car
Bend the appropriate tabs
to hold the mounting sleeve
firmly in place.
How to remove the unit
Installating the unit (in-dash mounting)
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
EN_KMM-357SD[EN]f.indd 15
EN_KMM-357SD[EN]f.indd 15
12/17/12 5:10:28 PM
12/17/12 5:10:28 PM
