10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
While listening to any source...
1
Press
AUD
to enter
[AUDIO CONTROL]
directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
–15
to
+15
(
0
)
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
+2
)
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want
to adjust.)
MID LEVEL
–8
to
+8
(
+1
)
TRE LEVEL
–8
to
+8
(
+1
)
EQ PRO
(This setting is stored to
[USER]
.)
BASS ADJUST BASS CTR FRQ
60
/
80
/
100
/
200
or
60HZ
/
80HZ
/
100HZ
/
200HZ
:
Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+2
): Adjusts the level.
BASS Q FACTOR
1.00
/
1.25
/
1.50
/
2.00
: Adjusts the quality factor.
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
MID ADJUST
MID CTR FRQ
0.5KHZ
/
1.0KHZ
/
1.5KHZ
/
2.5KHZ
: Selects the center
frequency.
MID LEVEL
–8
to
+8
(
+1
): Adjusts the level.
MID Q FACTOR
0.75
/
1.00
/
1.25
: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0KHZ
/
12.5KHZ
/
15.0KHZ
/
17.5KHZ
: Selects the
center frequency.
TRE LEVEL
–8
to
+8
(
+1
): Adjusts the level.
AUDIO SETTINGS
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/J
AZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music genre. (Select
[USER]
to use the settings made in
[EQ PRO]
.)
[DRIVE EQ]
is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST
LV1
/
LV2
/
LV3
or
LEVEL1
/
LEVEL2
/
LEVEL3
: Selects your preferred
bass boost level. ;
OFF
: Cancels.
LOUDNESS
LV1
/
LV2
or
LEVEL1
/
LEVEL2
: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than
85 Hz/120 Hz/160 Hz are sent to the subwoofer.
SUB-W PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than
[THROUGH]
is
selected for
[LPF SUBWOOFER]
.)
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
: Preset the initial
volume level of each source. (Before adjustment, select the source you
want to adjust.)
SOUND RECNSTR
(Sound reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
•
[SUB-W LEVEL]
/
[SUBWOOFER SET]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is
selectable only if
[SWITCH PREOUT]
is set to
[SUB-W]
or
[SUBWOOFER]
.
( 4)
•
[SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
ENGLISH
JS_KWD_KMM_203_ENE2N_EN_5.indd 10
JS_KWD_KMM_203_ENE2N_EN_5.indd 10
26-Aug-16 3:50:08 PM
26-Aug-16 3:50:08 PM
