4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the
display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[
YES
] is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
CLOCK
], then press the knob.
3
Turn the volume knob to select [
CLOCK ADJUST
], then press
the knob.
4
Turn the volume knob to make the settings, then press the
knob.
Day Hour Minute
5
Turn the volume knob to select [
CLOCK FORMAT
], then press
the knob.
6
Turn the volume knob to select [
12H
] or [
24H
], then press the
knob.
7
Press and hold
to exit.
To return to the previous setting item, press
.
While in clock display screen...
Press and hold
to enter clock adjustment mode
directly.
Then, perform step
4
to set the clock.
1
2
Set the initial settings
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [
FUNCTION
].
3
Turn the volume knob to make a selection (see the following table), then
press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH PREOUT
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are connected to
the line out terminals on the rear (through an external amplifier).
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ AM). ;
MIX
: Memorizes one station for each preset button, regardless
of the selected band.
SYSTEM
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables. (
8
)
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY
ON
: The clock time is shown on the display even when the unit is turned off. ;
OFF
: Cancels.
3
JS_KWD_KMM_112_KN_EN_1.indd 4
JS_KWD_KMM_112_KN_EN_1.indd 4
24/7/2014 5:17:45 PM
24/7/2014 5:17:45 PM
