ENGLISH
15
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
Installation/Connection
Pin
Color and function (for ISO connectors)
A4
Yellow
: Battery
A5
Blue/White*1
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
Fuse (10 A)
Antenna terminal
Blue/White*2
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
Brown
(Mute control wire)
To the terminal that is grounded when the
telephone rings or during conversation
(Page 17)
(To connect the Kenwood navigation
system, refer your navigation manual)
If no connections are made, do not let the wire come out from the tab.
To the steering wheel remote control
adapter
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
ISO connectors
NOTE: Total output for Blue/White wire
(*1) + (*2) is 12 V
350 mA
Output terminals
When connecting to an external amplifier to the output terminals of this unit, firmly connect the
ground wire of the amplifier to the car’s chassis to avoid damaging the unit.
JS_KWD_KMM_106_EN_EN.indd 15
JS_KWD_KMM_106_EN_EN.indd 15
5/15/2019 10:17:53 AM
5/15/2019 10:17:53 AM
