ENGLISH
13
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
About Android device
• This unit supports Android OS 4.1 and above.
• Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0.
• If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.
Change the display information
Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information
(eg. station name) appears or display will be blank.
Main display
Source name
Display information: Main display
STANDBY
Source name/Clock Clock back to the beginning
RADIO
Source name/Clock Frequency Clock back to the beginning
For FM Radio Data System stations only:
Source name/Clock Station name/Program type Radio text
Radio text+ Radio text+ song title/Radio text+ artist Frequency
Clock back to the beginning
USB
For MP3/WMA/WAV/FLAC files:
Source name/Clock Song title/Artist Album title/Artist Folder name
File name Playing time Clock back to the beginning
ANDROID
Source name/Clock Clock back to the beginning
AUX
Source name/Clock Clock back to the beginning
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting. (Page
5
)
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors. (Page 12)
The unit does not work at all.
Reset the unit. (Page 3)
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Radio
• Radio reception is poor.
• Static noise while listening to
the radio.
Connect the antenna firmly.
USB
Playback order is not as
intended.
The playback order is determined by the order in
which file name were recorded (USB).
Elapsed playing time is not
correct.
This depends on the recording process earlier (USB).
“READING” keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB).
TROUBLESHOOTING
REFERENCES
JS_KWD_KMM_105_MN_M2N_EN_4th Draft.indd 13
JS_KWD_KMM_105_MN_M2N_EN_4th Draft.indd 13
7/24/2018 11:36:45 AM
7/24/2018 11:36:45 AM
