background image

8

 

EN

Power amplifier section

Rated power output

● 

For other countries

STEREO MODE

130 watts per channel minimum RMS, both channels
driven at 6 

, from 20 Hz to 20,000 Hz with no more

than 0.02 % total harmonic distortion (FTC)

MONO (BTL) MODE

270 watts minimum RMS, at 6 

, from 20 Hz to 20,000

Hz with no more than 0.03 % total harmonic distor-
tion (FTC)

Frequency response

MAIN IN .......................... 5 Hz ~ 100 kHz, +0 dB, –3 dB

Signal to noise ratio

(IHF'66)

MAIN IN ....................................................... 115 dB

Input sensitivity / Impedance

STEREO MODE

MAIN IN .............................................. 1.1 V / 20 k

MONO (BTL) MODE

MAIN IN ............................................. 1.5 V/ 100 k

● 

For Europe

(IEC)

STEREO MODE

From 20 Hz to 20,000 Hz, 0.7 % T.H.D. at 6 

........................................................ 130 W+ 130 W

MONO (BTL) MODE

From 20 Hz to 20,000 Hz, 0.7 % T.H.D. at 6 

...................................................................... 270 W

(DIN)

STEREO MODE

1 kHz, 0.7 % T.H.D. at 6 

Ω ...............

145 W + 145 W

MONO (BTL) MODE

1 kHz, 0.7 % T.H.D. at 6 

Ω ................................

285 W

Total harmonic distortion

STEREO MODE

..................... 0.02 % (20 Hz ~ 20 kHz, 130 W, 6 

)

................................. 0.0018 % (1 kHz, 130 W, 6 

)

........................................ 0.05 %(1 kHz, 50 W, 2 

)

MONO (BTL) MODE

..................... 0.03 % (20 Hz ~ 20 kHz, 270 W, 6 

)

................................. 0.0018 % (1 kHz, 270 W, 6 

)

Specifications

For your records

Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers when-
ever you call upon your dealer for information or service on
this product.

Model

Serial Number

General

Power consumption ..................................................... 3.5 A

...................................................................... 320 W
......................................... Less than 2 W (Standby)

Dimensions

W: ................................................... 440 mm (17-5/16")
H:

..................................................... 128 mm (5-1/32")

D:

................................................... 385 mm (15-5/32")

Weight (net ) ............................................... 12.3 kg (27.2 Ib)

• KENWOOD follows a policy of continuous advancements in

development. For this reason specifications may be changed
without notice.

• Manufactured under license from Lucasfilm Ltd. Lucasfilm

and THX are trademarks or registered trademarks of
Lucasfilm Ltd.

For U.S.A.

FCC WARNING

This equipment may generate or use radio frequency en-
ergy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the
authority to operate this equipment if an unauthorized
change of modification is made.

NOTE:

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a resi-
dential installation. This equipment may cause harmful
interference to radio communications, if it is not installed
and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try  to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-

ceiver.

• Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Summary of Contents for KMF-X9000









Reviews: