Kenwood KMDX92, Instruction Manual

Page: 27 / 56

on or off.
Switching settings
Press either the AM button or FM button .
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
You can dim the display.
The dimmer function is not available for units if the dimmer wire
is not connected.
Turning Dimmer On/Off:
Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
Keep pressing the
¢
button until the Dimmer function
appears in the display.
Press the
4
button to search in the other direction.
The function setting is indicated by "Dimmer ON" or "Dimmer
OFF" in the display, indicated that the current dimmer setting is
2
1
NOTE
Dimmer
This function permits switching of the spectrum analyzer
d i s p l a y .
Switching the Spectrum Analyzer Display:
Each time you press the CLK button for at least one second,
the display switches as follows:
This function cannot be operated while the Black Mask function is
o n .
NOTE
Switching Spectrum Analyzer Display
— 27 —
Turning non-fading output On/Off :
Press the NF button for at least one second to set the function
ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
Non-fading preout