4
installation
installation
location
When selecting a position for your unit you should make sure the floor is flat and firm, and the
room is well ventilated with an average room temperature of between 16°C and 38°C. Avoid
locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight
as it may increase the electrical consumption. Extreme cold ambient temperatures may also
cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor
installation. Do not drape the unit with any covering.
levelling the unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the doors and magnetic seal alignments will
not be covered properly.
free space requirements
When installing the unit, ensure that 25 mm
of free space is left at both sides, 50 mm at
the rear of the unit and 25 mm at the top of
the unit. The door can be opened to the right
or the left, depending on which best suits the
location.
Please ensure there is more than twice the
width and depth distance space of the unit to
fully open the door to a maximum angle.
Y mm
X mm
KIL60W18_IB_RC_Final200703.indd 4
KIL60W18_IB_RC_Final200703.indd 4
3/7/2020 4:57 PM
3/7/2020 4:57 PM
