11
installation
5. Slot upper door into middle hinge pin and
hold in position. Screw the upper hinge
onto the opposite side of the unit.
6. With the door closed, check that the door
is aligned horizontally and vertically and
that the seals are closed on all sides
before finally tightening the hinge.
In some cases, the door seal may be crushed after prolonged storing pressure, resulting
to the door seal not able to close properly when reversed.
Follow the steps below to solve the issue:
• Peel off the door seal from the upper or lower corner and
warm it with a hairdryer; the warmth can allow the door
seal to return to its original form. Do not blow directly on
the unit as the warmth may damage other parts of the
unit.
• Rotate the door seal upside down so that the side
originally with the hinge stay with the hinge.
• Insert the door seal back into the door from the upper or
lower corner.
• If the issue still occurs, contact your local service centre for assistance.
180°
KIFF5017_IB_RC_190402_grace.indd 11
2/4/2019 12:18 PM
