21
adjusting the rinse aid setting
The rinse aid reservoir has five settings. Both the recommended setting and the factory setting is
“4.” If the dishes are not drying properly or are spotted, adjust to the next higher number until your
dishes are spot-free. If you fine they are spotted with rinse aid when the cycle has finished the
reduce the level.
1. With the dishwasher switched off press and hold the P
button.
rinse aid
level
rinse aid
dose
rinse aid level indicator
1
No rinse aid
released
2
1 dose is
dispensed
3
2 doses are
dispensed
4
3 doses are
dispensed
5
4 doses are
dispensed
KID60S18
Press and hold
Switch on while
holding button P down
2. While holding the P button down press the Power button to
switch the dishwasher on.
KID60S18
Press and hold
Switch on while
holding button P down
3. Keep holding the P button down until you see ‘rA’ in the
display. Then the display will show the current rinse aid
setting. The factory setting is r4.
4. Press the P button to scroll through the levels.
5. To save the setting press the Power button.
Kenwood Integrated Diswasher KID60S18 Manual.indd 21
07/12/2018 12:17
