33
internal care
filtering system
The filtering system in the base of the wash cabinet retains coarse debris from the wash cycle. The
collected coarse debris may cause the filters to clog. Check the condition of the filters regularly and
clean them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
1. Ensure the dishwasher is switched off.
2. Turn the coarse filter anti-clockwise and gently lift it out.
3. Rinse all the filters under running water, including the filter cylinder, and then re-fit all filters in the
reverse order.
4. Gently re-screw the coarse filter in clockwise direction. There will be a slight click when located
correctly.
• Do not over tighten the filters. Put the filters back in the filter cylinder in sequence
securely, otherwise the residue could get into the system and cause a blockage.
• NEVER
use the dishwasher without the filters in place. Improper replacement of the filters
may reduce the performance level of the appliance and damage dishes and utensils.
• Perform an intensive wash cycle periodically.
spray arms
Particles of food can get stuck in the spray arm jets and
bearings. The spray arms should therefore be checked
and cleaned regularly.
• Ensure the dishwasher is switched off. Use a pointed
object, e.g. a cocktail stick, to loosen food particles in
the spray arms’ jets.
Do not attempt to remove the spray arms.
KID60B16/A_IB_170428_grace.indd 33
28/4/17 3:42 pm
