11
installation
11. Move the magnet cord to the opposite side.
Reverse the upper hinge. Place the bottom
hole of the upper door onto the middle
hinge pin. Insert the upper hinge pin into the
upper hole of the upper door. Tighten the
pin securely. Screw the upper hinge tightly.
Cover the upper hinge with the upper hinge
cover.
• Ensure the upper door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
12. Attach the upper corner cover. Put back
the upper cover. Attach the upper door
corner block.
13. Move the door handles to the other side of
the doors accordingly.
cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the
Cleaning
section.
before using your unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
•
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
•
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.
KFCD60B_W_X15_IB_RC_151201_grace.indd 11
1/12/15 11:47 am
