Kenwood KDC-X689 Instruction Manual Download Page 32

Page: 32 / 48

English

Menu system

Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external
amplifier using the main unit.

Display

Setting

"AMP Bass:Flat"

Bass boost level is flat.

"AMP Bass:+6"

Bass boost level is low (+6dB).

"AMP Bass:+12"

Bass boost level is mid (+12dB).

"AMP Bass:+18"

Bass boost level is high (+18dB).

• Refer to the catalog or instruction manual for power

amplifiers that can be controlled from this unit.

• For amplifiers, there are the models you can set from

Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass:+18" will not work
correctly even if it is selected.

Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.

Display

Setting

"AMP FREQ:Normal"

Boost with the normal central frequency.

"AMP FREQ:Low"

Drop the normal central frequency 20%.

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.

Select AMP Control mode

Push the Control knob towards [FM] or [AM].

Select the "AMS Control" display.

Enter AMP Control mode

Press the Control knob for at least 1 second.

Select the AMP Control item for adjustment

Push the Control knob towards [FM] or [AM].

• For the details on the AMP Control item, see the

Instruction manual attached to the LX AMP.

Adjust the AMP Control item

Push the Control knob towards [

] or

[

Exit AMP Control mode

Press the [MENU] button.

• You cannot use the LX AMP operation during standby

mode.

In FM reception

CRSC (Clean Reception System
Circuit)

Temporarily have reception alternate from
stereo to mono to reduce multi-path noise when
listening to the FM station.

Display

Setting

"CRSC:ON"

The CRSC is ON.

"CRSC:OFF"

The CRSC is OFF.

• Strong electrical fields (such as from power lines) may

cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.

In HD Radio mode

Receive mode Setting

Sets the receive mode.

Select the Receive mode

Push the Control knob towards [FM] or [AM].

Select the "Receive Mode" display.

Enter Receive mode

Press the Control knob for at least 1 second.

Set the Receive mode

Push the Control knob towards [FM] or [AM].

Each time you push the knob, the Receive mode
alternates between the modes shown in the
table below.

B64-3147-00̲K̲English.indd 32

05.5.9 2:32:33 PM

Summary of Contents for KDC-X689

















































Search results

Summary of Contents for KDC-X689

Reviews:

Related manuals for KDC-X689

Brands by name

Popular brands

Kenwood KDC-X689, Instruction Manual

Search results

Summary of Contents for KDC-X689

Reviews:

Related manuals for KDC-X689

Brands by name

Popular brands