10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press
AUDIO
to enter
[AUDIO CONTROL]
.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat
step
2
until the desired item is selected or activated.
3
Press and hold
to exit.
(or
using
RC-406)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to make a selection, then press
ENT
IW
.
To return to the previous setting item or hierarchy, press
.
Default:
XX
SUB-W LEVEL
–15 to +15 (0):
Adjusts the subwoofer output level.
BAND1 LEVEL
–8 to +8 (+5):
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want
to adjust.)
BAND2 LEVEL
–8 to +8 (+5):
BAND3 LEVEL
–8 to +8 (+4):
BAND4 LEVEL
–8 to +8 (+5):
BAND5 LEVEL
–8 to +8 (+1):
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music genre. (Select
[USER]
to use the customized
BAND1
to
BAND5
settings.)
[DRIVE EQ]
is a preset equalizer that reduces noise from the road.
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
:
Selects your preferred bass boost level.
;
OFF
:
Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER
SET ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF
SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W
PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
HPF
THROUGH
: All signals are sent to the speakers. ;
100HZ
/
120HZ
/
150HZ
: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME
OFFSET
(Default:
0
)
–8
to
+8
(for AUX) ;
–8
to
0
(for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND
RECNSTR
(Sound
reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
[SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
EN_KDC_X400_M_f.indd 10
EN_KDC_X400_M_f.indd 10
5/12/2013 12:07:01 PM
5/12/2013 12:07:01 PM
