16
|
English
WOW Control
1
Select the source to adjust
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "WOW" is
displayed above the [4] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3
Enter WOW Control mode
Press the [4] ("WOW") button.
• When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "WOW".
4
Select the WOW Control item to adjust
Press a [1] — [5] button.
Multi-function keyoperation
WOW Control Item
[1] "EFFECT"
Effect
[2] "FOCUS"
FOCUS
[3] "TB_F"
TruBass Front
[4] "TB_R"
TruBass Rear
[5] "SRS 3D"
SRS 3D
5
Adjust the WOW control item
Push the Control knob towards [
4
] or
[
¢
].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
WOW Control Item
Range
Effect
Mid/High/User/Through/Low
FOCUS
OFF/1 — 9
TruBass Front
OFF/1 — 4
TruBass Rear
OFF/1 — 4
SRS 3D
OFF/1 — 4
• WOW: TruBass, FOCUS and SRS 3D are all set to values
shown in the table below.
WOW
TruBass
FOCUS
SRS 3D
High
4
8
4
Mid
3
6
2
Low
2
3
1
• FOCUS: Adjusts the vertical position of the front
speaker and sound image by virtual
adjustment.
• TruBass: Assists the playback for the super bass sound.
• SRS 3D: Makes a natural 3D sound field.
• You cannot set SRS 3D in tuner source.
6
Exit WOW Control mode
Press the [6] ("RTN") button.
• To get the best sound, first set the Speaker select.
Bypass Control
Temorarily bypassing DSP (Digital Signal
Processor) System.
1
Select the source to adjust
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "On Off" is
displayed above the [5] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3
Enter Bypass Control mode
Press the [5] ("On Off") button.
• When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "On Off".
4
Set up Bypass
Push the Control knob towards [
4
] or
[
¢
].
"Bypass": There is no effect by DSP.
"Through": There is an effect by DSP.
• When operation stops for 3 seconds, the Bypass
Control mode closes.
• When the mode is set to "Bypass", DSP System cannot
be adjusted.
• When the mode is set to "Bypass", ODD D/A System is
not effective.
General features
B64-3304-00̲01̲E̲English.indd 16
B64-3304-00̲01̲E̲English.indd 16
05.11.15 2:35:43 PM
05.11.15 2:35:43 PM
