10
|
English
General features
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound
setting switches.
Sound setting
Display
Flat
"Flat"
User memory
"User"
Rock
"Rock"
Pops
"Pops"
Easy
"Easy"
Top 40
"Top40"
Jazz
"Jazz"
• User memory: The values set on the 'Audio Control'
(page 10).
• Each setting value is changed with the 'Speaker
Setting' (page 10).
First, select the speaker type with the Speaker setting.
Audio Control
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4
Adjust the Audio item
Press the [
4
] or [
¢
] button.
Adjustment Item
Display
Range
Bass level
"Bass"
–8 — +8
Middle level
"Middle"
–8 — +8
Treble level
"Treble"
–8 — +8
Balance
"Balance"
Left 15 — Right 15
Fader
"Fader"
Rear 15 — Front 15
Sub woofer level*
"SW Level"
–15 — +15
Front/Rear High Pass
Filter
"HPF"
THRU/100/125/170 Hz
Sub woofer Low Pass
Filter*
"LPF SW"
50/80/120/THRU Hz
Volume offset
"V-offset"
–8 — ±0
Loudness
"LOUD"
ON/OFF
• Volume offset: Each source’s volume can be set as a
difference from the basic volume.
• Loudness: Compensating for low and high tones
during low volume.
• * You can control this item when 'Switching preout'
(page 25) is set to 'SWPRE Sub-W'.
5
Exit Audio Control mode
Press the [AUD] button.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [
4
] or [
¢
] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type
Display
OFF
"SP OFF"
For 5 & 4 in. speaker
"SP 5/4inch"
For 6 & 6x9 in. speaker
"SP 6*9/6inch"
For the OEM speaker
"SP O.E.M."
4
Exit Speaker Setting mode
Press the [Q] button.
B64-2704-00̲U.S(E).Indd 10
03.11.6, 8:49:53 PM
