Kenwood KDC-W4537U Instruction Manual Download Page 6

6

   

|

   

English

Notes

Handling CDs

•  Do not touch the recording surface of the CD.
•  Do not stick tape etc. on the CD, or use a CD with 

tape stuck on it.

•  Do not use disc type accessories.
•  Clean from the center of the disc and move 

outward.

•  When removing CDs from this unit, pull them out 

horizontally.

•  If the CD center hole or outside rim has burrs, 

use the CD only after removing the burrs with a 
ballpoint pen etc.

CDs that cannot be used

•  CDs that are not round cannot be used.

•  CDs with coloring on the recording surface or CDs 

that are dirty cannot be used.

•  This unit can only play the CDs with 

  This unit may not correctly play discs which do not 

have the mark.

•  You cannot play a CD-R or CD-RW that has not been 

finalized. (For the finalization process refer to your 
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)

This Product is not installed by the manufacturer of a 
vehicle on the production line, nor by the professional 
importer of a vehicle into an EU Member State.

Information on Disposal of Old Electrical 
and Electronic Equipment (applicable for 
EU countries that have adopted separate 
waste collection systems)

  

Products with the symbol (crossed-out 
wheeled bin) cannot be disposed as 
household waste. 
Old electrical and electronic equipment 
should be recycled at a facility capable 
of handling these items and their waste 
byproducts. Contact your local authority 
for details in locating a recycle facility 
nearest to you. Proper recycling and waste 
disposal will help conserve resources whilst 
preventing detrimental effects on our 
health and the environment.

The marking of products using lasers 
(Except for some areas) 

CLASS 1 
LASER PRODUCT

The label is attached to the chassis/case and says 
that the component uses laser beams that have been 
classified as Class 1. It means that the unit is utilizing 
laser beams that are of a weaker class. There is no 
danger of hazardous radiation outside the unit.

B64-3546-00̲English.indd   6

B64-3546-00̲English.indd   6

06.12.26   11:25:24 AM

06.12.26   11:25:24 AM

Summary of Contents for KDC-W4537U









































Reviews: