4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Set the initial settings
1
Press
to enter STANDBY.
2
Press the volume knob to enter [
FUNCTION
].
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ SW1/ SW2). ;
MIX
: Memorizes one station for
each preset button, regardless of the selected band.
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[
YES
] is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
CLOCK
], then press the knob.
3
Turn the volume knob to select [
CLOCK ADJUST
], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [
CLOCK FORMAT
], then press the knob.
6
Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
7
Press and hold
to exit.
To return to the previous setting item, press
.
While in clock display screen...
Press and hold
to enter clock adjustment mode directly.
Then, perform step
4
to set the clock.
1
2
3
JS_KWD_KDC_U563BT_MN_EN_01.indd 4
JS_KWD_KDC_U563BT_MN_EN_01.indd 4
7/7/2014 1:52:01 PM
7/7/2014 1:52:01 PM
