Kenwood KDC-U553BT, Instruction Manual

Page: 22 / 30

22
English
Function settings
1
Press SRC to select a source other than “STANDBY”.
2
Press the volume knob to enter [FUNCTION] mode.
3
Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS] , then press to enter.
4
Turn the volume knob to make a selection, then press to confirm.
■ ■
See table below for selection.
■ ■
Repeat step 4 until the desired item is selected/activated.
■ ■
Press to return to the previous item.
5
Hold to finish the procedure.
[AUDIO CONTROL]
: While listening to any source except in STANDBY state or Bluetooth mode.
Item Selectable setting (Preset: *)
SUB-W LEVEL –15 — 0 * — +15:
Adjusts the subwoofer output level.
BASS LEVEL –8 — 0 * — +8:
Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.) MID LEVEL
TRE LEVEL
EQ PRO
BASS ADJUST BASS CTR FRQ 60/ 80/ 100 */ 200:
Selects the center frequency.
BASS LEVEL –8 — 0 — +8 *:
Adjusts the level.
BASS Q FACTOR 1.00 */ 1.25/ 1.50/ 2.00:
Adjusts the quality factor.
BASS EXTEND ON *:
Turns on the extended bass. ;
OFF:
Cancels.
MID ADJUST MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K *:
Selects the center frequency.
MID LEVEL –8 — +2 * — +8:
Adjusts the level.
MID Q FACTOR 0.75/ 1.00 */ 1.25:
Adjusts the quality factor.
TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL –8 — +3 * — +8:
Adjusts the level.
PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL *:
Selects a preset sound mode suitable
to the music genre. (Selects
[USER]
to use the customized bass, middle, and treble settings.)
BASS BOOST B.BOOST LV1 */ B.BOOST LV2/ B.BOOST LV3:
Selects your preferred bass boost level. ;
OFF:
Cancels.
LOUDNESS LOUDNESS LV1/ LOUDNESS LV2:
Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ;
OFF *:
Cancels.
BALANCE L15 — 0 * — R15:
Adjusts the left and right speaker output balance.
FADER R15 — 0 * — F15:
Adjusts the rear and front speaker output balance.
SUBWOOFER SET ON *:
Turns on the subwoofer output. ;
OFF:
Cancels.
DETAILED SET
HPF THROUGH *: All signals are sent to the front speaker. ;
100/ 120/ 150 (HZ): Frequencies lower than the specified value are cut off.
LPF
SUBWOOFER THROUGH *:
All signals are sent to the subwoofer. ;
85/ 120/ 160 (HZ):
Frequencies higher than the specified value are cut off.
SUB-W PHASE REVERSE
(180°)
/ NORMAL
(0°)
*:
Selects the phase angle of the subwoofer output to be in line with the
speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
B64-4920-00_02_M_English.indd 22 11/12/21 9:43