background image

English

   13

Start playing an SD

•  Function of KDC-U4549SD.

Press   

SRC

 to turn on the power.

Press the Release button to Detach the 
faceplate.

Hold the SD card with the label side up 
and the notched section on the right, and 
insert it into the slot until it clicks.

Reattaching the Faceplate

Press   

SRC

 to select “SD”.

SD card 
(commercially available)

Removing the SD card

•  Function of KDC-U4549SD.

Press the Release button to Detach the 
faceplate.

Push the SD card until it clicks and then 
remove your finger from the card.
The card pops up so that you can pull it 
out with your fingers.

Reattaching the Faceplate.

Selecting Repeat Play

Press number button 

4 (REP)

 repeatedly 

to make a selection.

Audio CD : TRACK REPEAT, REPEAT OFF
Audio File : 

FILE REPEAT, FOLDER REPEAT, REPEAT OFF

iPod : 

FILE REPEAT, REPEAT OFF

CD changer : TRACK REPEAT, DISC REPEAT, 

REPEAT OFF

 Selecting Random Play

Press number button 

3 (ALL RDM)

 

repeatedly to make a selection.

Audio CD : DISC RANDOM, RANDOM OFF
Audio File/ iPod : 

FOLDER RANDOM, RANDOM OFF

CD changer : DISC RANDOM, RANDOM OFF

All Random Play

Press and hold number button 

3 (ALL RDM)

Pressing this button again plays songs in 
the normal mode starting.

Audio File/ iPod : 

ALL RANDOM, RANDOM OFF

 

Changes the iPod browsing item to “songs”.

 Selecting Magazine Random Play

Press number button 

repeatedly to 

make a selection.

CD changer : MGZN (magazine) RANDOM, 

RANDOM OFF

Selecting Scan Play

Press number button 

2 (SCAN)

 

repeatedly to make a selection.

Audio CD : TRACK SCAN, SCAN OFF
Audio File : FILE SCAN, SCAN OFF
CD changer : TRACK SCAN, SCAN OFF

 

If scan play is selected, the unit starts 
playing the first 10-second intro of the 
music in the disc/current folder.
If “SCAN OFF” is selected, the unit resumes 
normal play of the current song.

 Selecting a folder/track/file

•  Not available if disc changer playback is selected.

Press 

 to enter Music Search mode.

“SEARCH” appears, then the current file 
name appears on the display.

Turn the volume knob to select a folder/ 
track/ file, then press to confirm.

 

To skips songs, press 

4

¢

. Holding 

4

¢

 skips songs at 10% regardless of 

the setting made. (page 15)
This operation is effective only for the iPod 
or Kenwood Music Editor media.

 

To return to the root folder (audio file), top 
menu (iPod) or first track (audio CD), press 

BAND

.

 

To return to the previous folder, press 

.

 

To cancel the Music Search mode, press and 
hold 

.

 

< or > on the display indicates that 
preceded/next item is available.

B64-4803-10̲01̲M̲English.indd   13

B64-4803-10̲01̲M̲English.indd   13

11/01/06   15:11

11/01/06   15:11

Summary of Contents for KDC-U4549





































Reviews: