background image

English

   

|

   

29

Tuner source

?

  Radio reception is poor.

  The car antenna is not extended.

  Pull the antenna out all the way.

  The antenna control wire is not connected.

  Connect the wire correctly, referring to the 

section on <Connecting Wires to Terminals>.

Disc source

?

  "AUX EXT" is displayed without achieving 

External disc control mode.

  Unsupported disc changer is connected.

  Use the disc changer mentioned in the 

<About CD players/disc changers connected 
to this unit> (page 3) of the section on <Safety 
precautions>.

?

  The specified disc does not play, but another one 

plays instead.

  The specified CD is quite dirty.

 Clean the CD.

  The disc is loaded in a different slot from that 

specified.

  Eject the disc magazine and check the 

number for the specified disc.

  The disc is severely scratched.

  Try another disc instead.

?

  A CD ejects as soon as it is loaded.

  The CD is quite dirty.

  Clean the CD, referring to the CD cleaning of 

the section on <About CDs> (page 5).

?

  Can’t remove disc.

  The cause is that more than 10 minutes has 

elapsed since the vehicle ACC switch was turned 
OFF. 

  The disc can only be removed within 10 

minutes of the ACC switch being turned OFF. 
If more than 10 minutes has elapsed, turn 
the ACC switch ON again and press the Eject 
button. 

?

  The disc won’t insert.

  There’s already another disc inserted.

 Press the [

0

] button and remove the disc.

?

  Direct Search can’t be done.

  Another function is ON.

  Turn Random Play or other functions OFF.

?

  Track Search can’t be done.

  For the discs/folders first or last song.

  For each disc/folder, Track Search can’t be 

done in the backward direction for the first 
song or in the forward direction for the last 
song.

Audio file source

?

  Cannot play an Audio file.

  The media is scratched or dirty.

☞ 

Clean the media, referring to the CD cleaning 
of the section on <About CDs> (page 5).

?

  The sound skips when an Audio file is being 

played.

  The media is scratched or dirty.

☞ 

Clean the media, referring to the CD cleaning 
of the section on <About CDs> (page 5).

  The recording condition is bad.

  Record the media again or use another media.

?

  The Audio file track time isn’t displayed correctly.

 ---

  There are times when it isn’t displayed 

correctly according to the Audio file recording 
conditions.

B64-3051-00̲English̲r3.indd   29

B64-3051-00̲English̲r3.indd   29

05.3.10   5:26:41 PM

05.3.10   5:26:41 PM

Summary of Contents for KDC-MP5029V

































Reviews: