![Kenwood KDC MP338 - Radio / CD Instruction Manual Download Page 7](http://html.mh-extra.com/html/kenwood/kdc-mp338-radio-cd/kdc-mp338-radio-cd_instruction-manual_187153007.webp)
English
|
7
Audio Setup
You can set Sound system , such as follows;
Adjustment Item
Display
Range
Front High Pass Filter* “HPF”
Through/40*1/60*1/80/100/120/
150/180/220*1 Hz
Rear High Pass Filter* “HPR”
Through/40*1/60*1/80/100/120/
150/180/220*1 Hz
Low Pass Filter
“LPF SW”
50*1/60*1,2/80/100*1/120/160*3/
Through Hz
Subwoofer Phase*
“PHASE”
Reverse (180°)/ Normal (0°)
Volume offset
“V-OFFSET” –8 — ±0 (AUX: -8— +8)
Loudness*
“LOUDNESS” OFF/ON
Dual Zone System*
“2ZONE”
OFF/ON
*Function of KDC-X492/KDC-MP438U/KDC-MP408U.
*1KDC-X492 only. *2KDC-MP438U/KDC-MP408U only.
*3KDC-MP338 only.
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “ZONE2” of <Menu
System> (page 12).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 6) or [
5
]/[
∞
] button on the remote control
(page 15).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the Control knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the Control knob.
4
Adjust the Audio setup item
Turn the Control knob.
5
Exit Audio Setup mode
Press the Control knob for at least 1 second.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
Display
OFF
“SP SEL OFF”
For 5 & 4 in. speaker
“SP SEL 5/4”
For 6 & 6x9 in. speaker
“SP SEL 6*9/6”
For the OEM speaker
“SP SEL OEM”
1
Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2
Enter Speaker Setting mode
Press the Control knob.
3
Select the Speaker type
Turn the Control knob.
4
Exit Speaker Setting mode
Press the Control knob.
B64-3955-00̲English̲K̲r1.indd 7
B64-3955-00̲English̲K̲r1.indd 7
07.11.12 5:19:57 PM
07.11.12 5:19:57 PM