background image

14

   

|

   

KDC-MP443/KDC-MP3043/KDC-MP343/KDC-MP243/KDC-MP243SW

Appendix 

About Audio file

•  Playable Audio file

  MP3 (.mp3), WMA (.wma)

•  Playable disc media

  

CD-R/RW/ROM

•  Playable disc file format

  ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Although the audio files are complied with the 
standards listed above, the play maybe impossible 
depending on the types or conditions of media or 
device. 

•  Playing order of the Audio file

  In the example of folder/file tree shown below, the 

files are played in the order from 

 to 

.

CD 

v

(

<

: Folder

v

: Audio fi

v

v
v

v.

v

Folder
Audio file

An online manual about audio files is put on the 
site, 

www.kenwood.com/audiofile/

. On this online 

manual, detailed information and notes which are not 
written in this manual are provided. Make sure to read 
through the online manual as well. 

For operating KCA-BT200 (optional)

For operation refer to Model-A-1 in the Instruction 
Manual of KCA-BT200, and the table below. The 
[AUTO]/[TI] button should be replaced with [SRC] 
button for <Answering the Waiting Call after 
Terminating the Current Call>.

Notation used in the KCA-BT200 
Instruction Manual

Operation

[

38

] button

[AUD] knob

Control knob

[AUD] knob

[AUTO]/[TI] button

[DISP] button

Control knob towards up or down

[FM+] or [AM–] button

Control knob towards left or right

[

4

] or [

¢

] button

For operating KCA-BT100 (optional)

To control KCA-BT100, operate as follows;
To make setting for <Selecting the Dialing Mode>, 
select <Menu System> (page 10). Pressing the 
[AUD] knob for at least 1 second after selecting 
the "D.MODE" item allows you to enter the dialing 
method selection mode. To exit from dialing method 
selection mode, press Search button.
To make <Disconnecting a Call>, <Clearing the 
Disconnection Message>, and <Rejecting an 
Incoming call>, press [DISP] button for at least 1 
second.
Moreover, some displays are different from the 
description of KCA-BT100 Instruction Manual. 

Displays of KCA-BT100 Instruction 
Manual

Actual displays on this unit

“DISCONCT” “HF 

D-CON”

“CONNECT” “HF 

CON”

“PHN-DEL” “DVC-DEL”
“P-STATUS” “D-STATUS”
“BT-CON Y” 

“HF-CON Y”

“BT-CON N”

“HF-CON N”

B64-4213-00̲00̲English.indd   14

B64-4213-00̲00̲English.indd   14

08.7.25   10:23:16 AM

08.7.25   10:23:16 AM

Summary of Contents for KDC-MP243





















Reviews: