7
5. Forced switching of K3I
Each press of the Preset 6 key in Tuner mode should switch
K3I from AUTO
→
Forced Wide
→
Forced Middle
→
Forced
Narrow
→
AUTO.
The initial status is AUTO and the display shows these
modes as follows.
• AUTO
: FMA
• Forced Wide
: FMW
• Forced Middle
: FMM
• Forced Narrow
: FMN
6. Test mode specifications of the CD receiver
• Forced ejection is inhibited in the reset start operation.
When the unit is reset while a CD is loaded in it, the CD
is not recognized by resetting.
• Each press of the Track Up key jumps to the following
track numbers:
No. 9
→
No. 15
→
No. 10
→
No. 11
→
No. 12
→
No.13
→
No. 14
→
No. 9 (The cycle restarts from here.)
• Each press of the Track Down key jumps to the previous
track number to the track being played.
• When the number of total trucks of the MP3 disc is less
than 9, 1st truck is played.
• When the disc media is CD, a short press of the Preset
1 key jumps to the track number 28.
7. Audio-related specifications
• A short press of the Q key initiates the audio adjustment
mode.
• Pressing the
✽
key on the remote initiates the audio ad-
justment mode.
• Fader is selected to the initial item.
• Continuous holding of a remote control key is inhibited.
• Bass, Middle and Treble are adjusted in 3 steps of Min/
Center/Max with the Track Up/Down keys.
• Balance is adjusted in 3 steps of Left Max/Center/Right
Max with the Track Up/Down keys.
• Fader is adjusted in 3 steps of Rear Max/Center/Front
Max with the Track Up/Down keys.
• Bass f/Bass Q/Bass EXT/Middle f/Middle Q/Treble f are
not death with by the audio adjust.
8. Menu-related specifications
• A short press of the PLAY/PAUSE key initiates the Menu
mode.
• Pressing the DNPP/SBF key on the remote initiates the
Menu mode.
• Continuous holding of a remote control key is inhibited,
a short press initiates the Menumode.
• Contrast is adjusted in 3 steps of 0/5/10, with the trackup/
down keys.
9. Backup current measurement
When the unit is reset while ACC is OFF (i.e. by turning
Backup ON), the MUTE terminal goes OFF in 2 seconds
in place of 15 second. (The CD mechanism is not acti-
vated at this time.)
10. Special display when the display is all on
Pressing the Preset keys while the power is ALL OFF dis-
plays the following information.
Version display
PRESET 1 (8 digits, Month/Day/Hour/Minute)
(Display) SYSxxxxx : System microcomputer
Short press : View power ON time.
(The All OFF period is not counted.)
PRESET 3 Long press/hold : Clear power ON time at
the power ON time displaying.
(Display) PonTim xxxxx Max. 60000 (hours)
Short press : Display CD operation time.
PRESET 4
Long press/hold : Clear CD operation time at
the CD operation time displaying.
(Display) CDTimxxxxx Max. 60000 (hours)
Short press : Display CD ejection count.
PRESET 5
Long press/hold : Clear CD ejection count at
the CD ejection count displaying.
(Display) EjeCnt xxxxx Max. 60000 (times)
Short press : Display Panel open/close count.
PRESET 6
Long press/hold : Clear Panel open/close
count at the Panel open/close count.
(Display) PnCnt xxxxx Max. 600000 (times)
11.Other specifications
LINE MUTE inhibit time is 1 second from 10 second when
start up the test mode.
12.Switching the frequency span (K/M type)
While holding the preset
q
key and preset
t
keys, reset
the unit.
13.Response to OEM setting (destination of elec-
tronic volume setting)
S03F/E models are response to OEM models option at
put in
µ
-com 2 pin.
Its setting re following steps.
TEST MODE
IC2-TYPE0 IC2-TYPE1
Description
(41pin)
(40pin)
Low
Low
q
Trade model (initial quantif)
Low
High
w
Trade model (CRSC Change)
High
Low
e
OEM model-ready CRSC change
High
High
r
OEM model-ready CRSC &
de-emphasis
KDC-M4524/G/Y/GY
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
