background image

26

   

|

   

KDC-DAB43U/ KDC-DAB4557U

English

   

|

   

27

DAB tuner section

Frequency range

L Band: 1452.960 MHz — 1490.624 MHz
Band III: 174.928 MHz — 239.200 MHz

Sensitivity

: -100 dBm

Signal to Noise ratio

: 80 dB

FM tuner section

Frequency range (50 kHz step)

: 87.5 MHz — 108.0 MHz

Usable sensitivity (S/N = 26dB)

: 1 μV/75 Ω

Quieting Sensitivity (S/N = 46dB)

: 2.5 μV/75 Ω

Frequency response (±3 dB)

: 30 Hz – 15 kHz

Signal to Noise ratio (MONO)

: 63 dB

Stereo separation (1 kHz)

: 40 dB

MW tuner section

Frequency range (9 kHz step)

: 531 kHz – 1611 kHz

Usable sensitivity (S/N = 20dB)

: 36 µV

LW tuner section

Frequency range (9 kHz step)

: 153 kHz – 279 kHz

Usable sensitivity (S/N = 20dB)

: 57 µV

CD player section

Laser diode

: GaAlAs

Digital filter (D/A) 

: 8 Times Over Sampling

D/A Converter

: 24 Bit

Spindle speed (Audio files)

: 500 – 200 rpm (CLV)

Wow & Flutter

: Below Measurable Limit

Frequency response (±1 dB)

: 20 Hz – 20 kHz

Total harmonic distortion (1 kHz) 

: 0.01 %

Signal to Noise ratio (1 kHz)

: 105 dB

Dynamic range

: 93 dB

MP3 decode

: Compliant with MPEG-1/2 Audio Layer-3

WMA decode

: Compliant with Windows Media Audio

AAC decode 

: AAC-LC “.m4a” files

USB interface

USB Standard

: USB1.1/ 2.0 (Full speed)

File System 

: FAT16/ 32

Maximum Supply current

: DC 5 V 

=

 1 A

MP3 decode 

: Compliant with MPEG-1/2 Audio Layer-3

WMA decode 

: Compliant with Windows Media Audio

AAC decode 

: AAC-LC “.m4a” files

11.  SPECIFICATIONS

Audio section

Maximum output power

: 50 W x 4

Output power (DIN 45324, +B=14.4V)

: 22 W x 4

Speaker Impedance

: 4 – 8 Ω

Tone action

Bass : 100 Hz ±8 dB
Middle : 1 kHz ±8 dB
Treble : 12.5 kHz ±8 dB

Preout level/ Load (CD)

: 2500 mV/10 kΩ

Preout impedance

: ≤ 600 Ω

Auxiliary input

Frequency response (±3 dB)

: 20 Hz – 20 kHz

Input Maximum Voltage

: 1200 mV

Input Impedance

: 10 kΩ

DAB Antenna Connector

Connector  type

: SMB

Output Voltage

: 14.4 V (11 V — 16 V)

Maximum Current

: <100 mA

General

Operating voltage

: 14.4 V (11 – 16V allowable)

Maximum Current consumption

: 10 A

Installation Size (W x H x D) 

: 182 x 53 x 160 mm

Weight

: 1.2 kg

 

Specifications subject to change without notice.

11.2 Trademarks

• 

The “AAC” logo is a trademark of Dolby Laboratories.

• 

iTunes is a trademark of Apple Inc.

• 

“Made for iPod” and “Made for iPhone” mean that an 
electronic accessory has been designed to connect 
specifically to iPod or iPhone, respectively, and has been 
certified by the developer to meet Apple performance 
standards. Apple is not responsible for the operation of 
this device or its compliance with safety and regulatory 
standards. Please note that the use of this accessory with 
iPod or iPhone may affect wireless performance.

• 

iPhone, iPod, iPod classic, iPod nano, and iPod touch are 
trademarks of Apple Inc., registered in the U.S. and other 
countries.

• 

Android is a trademark of Google Inc. 

• 

Microsoft and Windows Media are either registered 
trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.

• 

DAB+ 

11.1 Specifications of each section

Summary of Contents for KDC-DAB43U
















Reviews: