— 8 —
English
Operations
Display Level Adjustment
You can adjust the spectrum analyzer level.
Selecting CD play source mode.
Press the DISP button for at least one second.
Press either the
¢
or
4
button on the centre unit.
Press the
¢
button: Level increased.
Press the
4
button: Level decreased.
(by 11 steps)
Ending the display level adjustment mode:
Press the DISP button.
3
2
1
Eject
A press of the
0
button stops the CD play and ejects the CD.
When you load a CD and eject it right away, the next time you try
to insert the CD may not load. In such a situation, take the CD
out for a moment and then reinsert it.
NOTE
0
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing Faceplate:
Press the release button and drop open the faceplate.
In its dropped condition, whilst drawing the faceplate to one
side, pull it to the front and remove it.
• If the controls remain untouched for a period of 5 minutes or
more after the panel has dropped open or been removed, the
disc will automatically stop playing. (A warning beep starts
sounding 30 seconds before play stops automatically.)
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the
faceplate in its special storage case whilst detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places
with too much dust or the possibility of water splashing.
NOTE
INTEGRATED QUAD
1 BIT D/A
CONVERTER
KDC-D301
CD PLAYER
DIGITAL OPTIMUM
SERVO CONTROL
11BAND
SPECTRUM ANALYZER
60
120
250
380
500
750
1k
2k
4k
8k
16k
DPAC
DISP
Release button
