20
|
KDC-BT7043U/ KDC-MP6043U
Audio Adjustments
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
Display
OFF
“SP SEL OFF”
For 5 & 4 in. speaker
“SP SEL 5/4”
For 6 & 6x9 in. speaker
“SP SEL 6x9/6”
For the OEM speaker
“SP SEL OEM”
1
Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2
Enter Speaker Setting mode
Press the [AUD] knob.
3
Select the Speaker type
Turn the [AUD] knob.
4
Exit Speaker Setting mode
Press the [AUD] knob.
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 18)
- <Audio Setup> (page 19)
2
Enter Audio Preset Memory mode (Other than
Standby mode)
Select “MENU”
>
“AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Select the Audio Preset Memory
Turn the [AUD] knob.
4
Determine whether to put the Audio Preset in
the memory
Press the [AUD] knob.
“MEMORY” is displayed.
5
Put the Audio Preset in the memory
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 20).
1
Select the source
2
Enter Audio Preset Recall mode (Other than
Standby mode)
Select “MENU”
>
“AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Select the Audio Preset Recall
Turn the [AUD] knob.
Select the “RECALL” display.
4
Determine whether to recall the Audio Preset
Press the [AUD] knob.
5
Recall the Audio Preset
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
6
Exit Audio Preset mode
Press the [SERACH] button twice.
⁄
• The User memory of “SYSTEM Q” in <Audio Control>
(page 18) is changed to the value which was recalled.
• The source tone memory item of <Audio Control> (page
18) is changed to the value which was recalled by the
selected source.
6
Exit Audio Preset mode
Press the [SERACH] button twice.
⁄
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Volume offset, Dual Zone System,
Rear Volume
B64-4316-00_00.indb 20
08.11.1 0:53:13 PM
