24
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
SPECIFICATIONS
Tuner
FM Frequency Range
87.9 MHz — 107.9 MHz
(200 kHz space)
Usable Sensitivity
(S/N = 26 dB)
8.2 dBf (0.71 μV/75 Ω)
Quieting Sensitivity
(DIN S/N = 46 dB)
17.2 dBf (2.0 μV/75 Ω)
Frequency Response
(±3 dB)
30 Hz — 15 kHz
Signal-to-Noise Ratio
(MONO)
64 dB
Stereo Separation
(1 kHz)
40 dB
AM Frequency Range
530 kHz — 1 700 kHz
(10 kHz space)
Usable Sensitivity
(S/N = 20 dB)
29 dBμ (28.2 μV)
CD player
Laser Diode
GaAIAs
Digital Filter (D/A)
8 times over sampling
Spindle Speed
500 rpm — 200 rpm (CLV)
Wow & Flutter
Below measurable limit
Frequency Response (±1 dB)
20 Hz — 20 kHz
Total Harmonic Distortion
(1 kHz)
0.01 %
Signal-to-Noise Ratio
(1 kHz)
: 110 dB
Other models: 105 dB
Dynamic Range
90 dB
Channel Separation
85 dB
Symptom
Remedy
Bluetooth®
No Bluetooth device is
detected.
•
Search from the Bluetooth device again.
•
Reset the unit. (
3
)
Bluetooth pairing cannot
be made.
•
Make sure you have entered the same PIN code to both the unit and
Bluetooth device.
•
Delete pairing information from both the unit and the Bluetooth
device, then perform pairing again. (
13
)
Echo or noise is heard during
a phone conversation.
•
Adjust the microphone unit’s position. (
13
)
•
Check the [
ECHO CANCEL
] setting. (
14
)
Phone sound quality is
poor.
•
Reduce the distance between the unit and the Bluetooth device.
•
Move the car to a place where you can get a better signal reception.
Voice calling method is not
successful.
•
Use voice calling method in a more quiet environment.
•
Reduce the distance from the microphone when you speak the name.
•
Make sure the same voice as the registered voice tag is used.
Sound is being interrupted
or skipped during playback
of a Bluetooth audio player.
•
Reduce the distance between the unit and the Bluetooth audio player.
•
Turn off, then turn on the unit and try to connect again.
•
Other Bluetooth devices might be trying to connect to the unit.
The connected Bluetooth
audio player cannot be
controlled.
•
Check whether the connected Bluetooth audio player supports Audio/
Video Remote Control Profile (AVRCP). (Refer to the instructions of your
audio player.)
•
Disconnect and connect the Bluetooth player again.
“DEVICE FULL”
The number of registered devices has reached its limit. Retry after
deleting an unnecessary device. (
17
,
DEVICE DELETE
)
“N/A VOICE TAG”
Make sure the same voice as the registered voice tag is used.
“NOT SUPPORT”
The connected phone does not support Voice Recognition feature.
“NO ENTRY” / “NO PAIR”
There is no registered device connected/found via Bluetooth.
“ERROR”
Try the operation again. If “ERROR” appears again, check if the device
supports the function you have tried.
“NO INFO”
Bluetooth device cannot get the contact information.
“HF ERROR XX” /
“BT ERROR”
Reset the unit and try the operation again. If this does not solve the
problem, consult your nearest service center.
TROUBLESHOOTING
JS_KWD_KDC_X599_KW_EN_02.indd 24
JS_KWD_KDC_X599_KW_EN_02.indd 24
17/7/2014 9:54:10 AM
17/7/2014 9:54:10 AM
