Kenwood KDC-BT282U Instruction Manual Download Page 39

ENGLISH

33

Data Size: 

B6L (182 mm x 128 mm)

Book Size: 

B6L (182 mm x 128 mm)

 References

 Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

 Cleaning the connector

Detach the faceplate and clean the connector gently 
with a cotton swab. Be careful not to damage the 
connector.

Handling discs

•  Do not touch the recording surface of the disc.
•  Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•  Do not use any accessories for the disc.
•  Clean from the center of the disc and move outward.
•  Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
•  When removing a disc from this unit, pull it out horizontally.
•  Remove burrs from the center hole and disc edge before inserting a disc.

 More  information

For:  –  Latest firmware updates and latest compatible item list
 

–  KENWOOD original application

 

–  Any other latest information

Visit <https://www.kenwood.com/cs/ce/>.

 General

•  This unit can only play the following CDs:

•  For detailed information and notes about the playable audio files, visit 

<https://www.kenwood.com/cs/ce/audiofile/>.

Connector (on the reverse 
side of the faceplate)

 Playable  files

• Disc:
  Playable audio file:
  MP3 (.mp3), WMA (.wma), AAC (.aac)
  Playable media: CD-R/ CD-RW/ CD-ROM
  Playable file format: ISO 9660 Level 1/2, Joliet, Long file name
•  USB mass storage class device:
  Playable audio file:
  MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)
  Playable file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible 
depending on the types or conditions of media or devices.
The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.

Unplayable discs

•  Discs that are not round.
•  Discs with coloring on the recording surface or discs that are dirty.
•  Recordable/ReWritable discs that have not been finalized.
•  8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•  You cannot connect a USB device via a USB hub.
•  Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
•  This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.

About iPod/iPhone

• Made for
  – iPod touch (6th generation)
  – iPhone 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS MAX, XR, 11, 11 Pro, 

11 Pro MAX, SE (2nd generation), 12, 12 Mini, 12 Pro, 12 Pro MAX

•  The song order displayed on the selection menu of this unit may differ from that of the iPod/

iPhone.

•  Depending on the version of the operating system of the iPod/iPhone, some functions may not 

operate on this unit.

JS_KWD_KDC_BT370U_KN_EN.indd   33

JS_KWD_KDC_BT370U_KN_EN.indd   33

4/7/2021   12:04:29 PM

4/7/2021   12:04:29 PM

Summary of Contents for KDC-BT282U

































































Reviews: