Fine-tuning so that the System Q value is optimal when setting
the speaker type.
Speaker Setting
switch as shown below.
4
Adjust the Audio item
Press the [
4
] or [
¢
] button.
Adjustment Item
Display
Range
Bass Center Frequency
"Bass F"
60/70/80/100 or 150 Hz
Bass level
"Bass"
–8 — +8
Bass Q Factor
"Bass Q"
1.00/1.25/1.50/2.00
Bass Extend
"Bass EXT"
ON/OFF
Middle Center Frequency "MID F"
0.5/1.0/1.5/2.0 kHz
Middle level
"Middle"
–8 — +8
Middle Q Factor
"Middle Q"
1.0/2.0
Treble Center Frequency
"TRE F"
10.0/12.5/15.0/17.5 kHz
Treble level
"Treble"
–8 — +8
Balance
"Balance"
Left 15 — Right 15
Fader
"Fader"
Rear 15 — Front 15
Volume offset
"V Offset"
–8 — ±0
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the Bass Extend is set to ON, low frequency response is
extended by 20%.
• Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
Audio Control
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Display
Flat
"Flat"
Rock
"Rock"
Top 40
"Top 40"
Pops
"Pops"
Jazz
"Jazz"
Easy
"Easy"
Scan of Flat — Easy
"Scan"
User memory
"User"
• User memory: The values set on the <Audio control> (page 8).
• Each setting value is changed with the <Speaker setting> (page
8).
First, select the speaker type with the Speaker setting.
System Q
General features
— 8 —
English
KDC-8020_U.S (M_K) r4 01.10.19 1:52 PM Page 8