Kenwood KDC-7070R Instruction Manual Download Page 43

Page: 43 / 48

— 43 —

Attaching Steering Remote Control (Optional for
the KDC-7070R)

Attach the operation section and the light emitting section of the
Steering Remote Control as shown above.
Be sure to attach them to positions that can ensure proper
operation.

• Clean dirt and oil from the positions where the Steering Remote

Control sections are to be attached.

• If the attached position is cold, warm it before attaching.
• The position should be selected so that the product does not

come in the way of steering operation.

• Do not attach anything on the surface of a steering wheel

incorporating an air bag.

• Before finally affixing the transmitter, check various angles to

find an orientation that provides faithful operation.

CAUTION

Mounting Example

,,,

,,,,,,,

,,,,,,,,,

,,,,,,,,,,

,,,,,,,,,

,,,,,,

,,,

,,,,,,,,,,

,,,,,,,

,,,

,,,,,

,,,,,,,,

,,,,,,

,,,,,

,,,,

,,,

,,,,,

,,,,

,,,

,,,,,

,,,

,,,,,

,,,,

Summary of Contents for KDC-7070R

















































Search results

Summary of Contents for KDC-7070R

Reviews:

Brands by name

Popular brands

Kenwood KDC-7070R, Instruction Manual

Search results

Summary of Contents for KDC-7070R

Reviews:

Brands by name

Popular brands