— 42 —
E
nglis
h
SOLUTION
POSSIBLE CAUSE
PROBLEM
A CD ejects as soon as it is
loaded.
The CD is upside-dow n.
Load the CD w ith the labelled side up.
The CD is quite dirty.
Clean the CD, referring to the section on "Cleaning CDs" (see
page
5
).
The sound skips on a CD.
The CD is scratched or dirty.
Clean the CD, referring to the section on "Cleaning CDs" (see
page
5
).
The specified track does not
play.
Random play has been selected.
Turn off the random play function.
Troubleshoot ing Guide
Disc
Control mode
SOLUTION
POSSIBLE CAUSE
PROBLEM
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see page
4
).
The disc
control
mode cannot
be selected.
No cable has been connected to the disc changer input
terminal on the unit.
Connect the cable to the disc changer input terminal on the
unit.
The specified disc does not
play, but another one plays
instead.
The specified CD is very dirty.
Clean the CD.
The CD is upside-dow n.
Load the CD w ith the labelled side up.
The disc is loaded in a different slot from that specified.
Eject the disc magazine and check the number for the
specified disc.
The disc is severely scratched.
Try another disc instead.
The sound skips.
Something is touching the disc changer.
Remove w hatever is touching it.
The CD is scratched or dirty.
If skipping happens at the same place w hen the car is
stopped, something is w rong w ith the CD. Clean the CD.
The display show s that the
changer is being played, but no
sound can be heard.
The specified track does not
play.
Random play or magazine random play has been selected.
Turn off the random play or magazine random play function.
http://www.usersmanualguide.com/