Kenwood KDC-5057SD, Instruction Manual

Page: 76 / 82

76
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
Bluetooth settings (KDC-BT73DAB, KDC-BT53U)
16-5. Switching between two
connected cell-phones
When two Bluetooth devices are connected, you
can assign the Bluetooth device to be used in
priority to the other Bluetooth device.
1
Press [
Ú
].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Device Priority" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
3
Select a "Sub –###–" using [Control] knob.
"Main": Device used normally.
"Sub": Device used only for call reception.
4
Press [Control] knob.
Exiting from the Bluetooth mode
Press [
Ú
].
16-4. Displaying the firmware version
You can view the version of the firmware of this
unit.
1
Press [
Ú
].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Detailed Settings" > "BT
F/W Update" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
The firmware version appears.
Exiting from the Bluetooth mode
Press [
Ú
].
How to update
•
For how to update the firmware, access our web site.
www.kenwood.com/bt/information/