Kenwood KDC-5057SD, Instruction Manual

Page: 17 / 82

English
|
17
4. Audio adjustments (KDC-5057SD)
4-2. Audio preset
You can register the values set the Audio control
items.
1
Set the audio control items
Refer to <4-1. Audio control> (page 16) .
2
Select "Audio Control" > "Detailed Settings"
> "Audio Preset" > "Memory" using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
3
Select "YES" using [Control] knob.
"Memory Completed" appears.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
Number of Audio preset memories that can be stored
• Register a pair of Audio preset memories. You cannot
register them by source.
When reset
• When you press the Reset button, audio control values of all
sources will be set to the values registered here.
Audio control items that can be registered
• The following Audio control items can be registered.
"Bass Center FRQ", "Bass Level", "Bass Q Factor", "Bass EXT",
"Middle Center FRQ", "Middle Level", "Middle Q Factor",
"Treble Center FRQ", "Treble Level", "SubWoofer Level", "HPF",
"LPF SubWoofer", "SubWoofer Phase"
4-3. Audio preset recall
You can recall the Audio control items registered to
the
<4-2. Audio preset> (page 17) .
1
Press [SRC] to select a recall source.
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" > "Detailed Settings" >
"Audio Preset" > "Recall" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select "YES" using [Control] knob.
"Recall Completed" appears.
Exiting from the Function setting mode
Press and hold [
1
/
6
].