Kenwood KDC-5051U, Instruction Manual

Page: 8 / 59

8
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
Audio adjustments
Audio preset recall
Recalling the sound setup registered by <Audio
preset Memory> (page 8) .
1
Select the source
Press the [SRC] button.
2
Enter Audio control mode
Press the Control knob.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings”
> “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
4
Select the Audio preset recall
Turn the Control knob to select “Recall”, and
then press the Control knob.
5
Turn the Control knob to select “YES”, and
then press the Control knob.
“Recall Completed” is displayed.
6
Exit Audio Control mode
Press the [ ] button for at least 1 second.
Audio preset Memory
Registering the value setup by Audio Control.
1
Setup Audio control
Setup the <Audio control> (page 7) .
2
Enter Audio control mode
Press the Control knob.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings”
> “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
4
Select the Audio preset memory
Turn the Control knob to select “Memory”, and
then press the Control knob.
5
Turn the Control knob to select “YES”, and
then press the Control knob.
“Memory Completed” is displayed.
6
Exit Audio Control mode
Press the [ ] button for at least 1 second.
⁄
•
Register 1 pair of Audio Preset Memory. You cannot register
by the source.
•
When you press the Reset, all the sources will be the setting
value which is registered.
•
The following items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF
Front”, “HPF Rear”, “LPF SubWoofer”, “SubWoofer Phase”